Jump to content
Sign in to follow this  
abi

"rig, carting" equipment. ????

Recommended Posts

Right so...

We have recently built a rig cart thingy and now we need equipment for the dogs e.g harnesses and leads and that what equipment do you suggest and where should we get it from??

we have looked on the internet but can't decide what harness is best? x-back? but then we had trouble measuring them. As we have 3 dogs im not sure of what ganglines and that would suit us!!

Hellllp!!!

Share this post


Link to post
Share on other sites

If you're using a rig the xback or manmat harness would be best.

How many are you running?

Neck lines are also a good idea

Share this post


Link to post
Share on other sites

I'd recommened an xback for using a rig...but my 2 use scootering harnesses as they don't like the xback

If your running 3 dogs you'll need a gangline extension and a single tug. (the gangline extension will contain the neck connectors)

This is who you measure your dog for an xback

Measuring Dogs

Neck (all harnesses) - Measure from just ahead of the withers at the base of the neck to the top of the breastbone, then double this measurement. Work the tape under the fur, pull it snug, but not stretched. Measure the dog, not the fur! Measure only one side of the dog then double the measurement. Wrapping the tape measure all the way around the neck may distort the measurement.

Neck fit is critical. When properly fitted, where the webbing crosses at the "Y" below the neck , the webbing should cross right on the breastbone. At the same time you are holding the webbing in place on the breastbone, check to see that the webbing in the "Y" at the top of the neck, crosses where the neck joins the withers (shoulder blades). If in doubt about fit call us.

Tail (x-back, recreation, split chest, h-back) - Start tape at top of breastbone. Pass between front legs, then up around rib cage to base of tail. Lift tail to feel join.

Check fit of tail length by pulling on webbing to see if the webbing will come to the base of the tail. Webbing should not come to the base of the tail unless there is tension against it. The more coat the dog has the more tension is required.

p20.gif

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy.